3D CustomizerA tea brand needs its box 8 mm taller for a new pack. Change one number, and the dieline, the mockup and the print file are all updated.
02 · Dieline creator & editor
Any box, any size, ready for the cutter
Choose a structure, type the size and the material. The dieline, the 3D model and the print file all come from the same geometry.
Straight tuck end90 × 90 × 90 mm
Ready to printPDF · CMYK · bleed, cut and crease included
How it works
- 01Choose
Pick a box or print structure: tuck end, mailer, tray, brochure, card.
- 02Size it
Type the length, width and height. Flaps, tucks and glue areas rebuild.
- 03Download
Get the dieline as SVG or DXF, and a ready-to-print PDF with cut and crease.
The problems it solves
Challenge 01
Every new size means a new dieline
Today
A structural designer redraws flaps and tucks for each size, and a small mistake wastes a sheet of board.
With PrintOS
Structures are built from rules. Type a new size and every flap, tuck and glue area is rebuilt correctly.
Challenge 02
Artwork drawn on the wrong template
Today
Designers place artwork on an old dieline, and it misses the folds.
With PrintOS
The flat dieline, the 3D model and the print file come from the same geometry, so artwork always sits on the current one.
Challenge 03
Cut and crease mixed with artwork
Today
Files arrive with cut lines baked into the artwork, and the cutter cannot use them.
With PrintOS
Cut, crease, perforation and bleed are exported on their own layers, as SVG, DXF or a print-ready PDF.
Why shops choose it
Selling point 01
Fold before you cut
See the box fold in 3D before anyone cuts a sample, and catch a wrong flap on screen.
Tuck end · 70 × 45 × 120 mm
CHAI
Selling point 02
Files your cutter can read
Layers are named and separated, so the cutting table and the press each get what they need.
Export
Print PDFCMYK · bleed · marks
Dieline SVGCut · crease
Dieline DXFLayered for the cutter
What is inside
Parametric structures
Every structure is built from rules, so any size works.
Materials
Board and paper choices with their own bleed and safe zones.
Layered output
Cut, crease, perforation and bleed on separate layers.
3D fold preview
Watch it fold before you cut a sample.
Finish plates
Spot UV, foil and emboss as their own plates.
Ready to print
PDF with CMYK, bleed and crop marks, downloaded in one click.
In a real shop
Works together with
See dieline creator & editor on your own jobs
Book a 30 minute demo with our team.